Fechar

1. Identificação
Tipo de ReferênciaArtigo em Revista Científica (Journal Article)
Sitemtc-m21c.sid.inpe.br
Código do Detentorisadg {BR SPINPE} ibi 8JMKD3MGPCW/3DT298S
Identificador8JMKD3MGP3W34R/3SMPMGE
Repositóriosid.inpe.br/mtc-m21c/2019/02.07.15.47   (acesso restrito)
Última Atualização2019:02.07.15.47.15 (UTC) administrator
Repositório de Metadadossid.inpe.br/mtc-m21c/2019/02.07.15.47.15
Última Atualização dos Metadados2021:01.03.02.11.22 (UTC) administrator
DOI10.1155/2019/6708450
ISSN1687-5966
Chave de CitaçãoVasconcelosLeiKusRobLop:2019:PhSoSt
TítuloStore separation: photogrammetric solution for the static ejection test
Ano2019
Data de Acesso31 out. 2024
Tipo de Trabalhojournal article
Tipo SecundárioPRE PI
Número de Arquivos1
Tamanho28814 KiB
2. Contextualização
Autor1 Vasconcelos, Luiz Eduardo Guarino de
2 Leite, Nelson Paiva Oliveira
3 Kusumoto, André Yoshimi
4 Roberto, Leandro
5 Lopes, Cristina Moniz Araújo
Grupo1 DIDSA-CGCPT-INPE-MCTIC-GOV-BR
Afiliação1 Instituto Nacional de Pesquisas Espaciais (INPE)
2 Instituto de Pesquisas e Ensaios em Voo (IPEV)
3 Instituto de Pesquisas e Ensaios em Voo (IPEV)
4 Instituto de Estudos Avançados (IEAv)
5 Instituto Tecnológico de Aeronáutica (ITA)
Endereço de e-Mail do Autor1 luiz.guarino@inpe.br
RevistaInternational Journal of Aerospace Engineering
Volume2019
Número6708450
Histórico (UTC)2019-02-07 15:48:08 :: simone -> administrator :: 2019
2021-01-03 02:11:22 :: administrator -> simone :: 2019
3. Conteúdo e estrutura
É a matriz ou uma cópia?é a matriz
Estágio do Conteúdoconcluido
Transferível1
Tipo do ConteúdoExternal Contribution
Tipo de Versãopublisher
ResumoThe process of developing and certifying aircraft and aeronautical systems requires the execution of experimental flight test campaigns to determine the actual characteristics of the system being developed and/or validated. In this process, there are many campaigns that are inherently dangerous, such as the store separation. In this particular case, the greatest risk is the collision of the store with the fuselage of the aircraft. To mitigate the risks of this campaign, it is necessary to compare the actual trajectory of a separation with its simulated estimates. With such information, it is possible to decide whether the next store release can be done with the required safety and/or whether the model used to estimate the separation trajectory is valid or not. Consequently, exact determination of the trajectory of the separation is necessary. Store separation is a strategic, relevant, and complex process for all nations. The two main techniques for determining the quantitative store trajectory data with 6DoF (six degrees of freedom) are photogrammetry and instrumented telemetry packages (data obtained from inertial sensors that are installed in the store). Each presents advantages and disadvantages. In regard to photogrammetry, several market solutions can be used to perform these tests. However, the result of the separation trajectory is only obtained after the test flight, and therefore, it is not possible to safely carry out more than one on the same flight. In this context, the development and validation of a solution that will allow the realization of near real-time separation analysis are in fact an innovative and original work. This paper discusses the development and validation, through actual static ejection tests, of the components that will compose a new onboard optical trajectory system for use in store separation campaigns. This solution includes the implementation of a three-dimensional (3D) calibration field that allows calibration of the optical assembly with just one photo per optical assembly, development of a complete analytical model for camera calibration, and development of specific software for identification and tracking of targets in two-dimensional (2D) coordinate images and three-dimensional (3D) coordinate trajectory calculation. In relation to the calibration, the analytical model is based on a pinhole type camera and considers its intrinsic parameters. This allowed for a mean square error smaller than +/- 3.9 pixels @1 sigma. The 3D analysis software for 6DoF trajectory expression was developed using photogrammetry techniques and absolute orientation. The uncertainty associated with the position measurement of each of the markers varies from +/- 0.02mm to +/- 8.00mm @1 sigma, depending on the geometry of the viewing angles. The experiments were carried out at IPEV (Flight Test Research Institute)/Brazil, and the results were considered satisfactory. We advocate that the knowledge gained through this research contributes to the development of new methods that permit almost real-time analysis in store separation tests.
ÁreaMET
Conteúdo da Pasta docacessar
Conteúdo da Pasta sourcenão têm arquivos
Conteúdo da Pasta agreement
agreement.html 07/02/2019 13:47 1.0 KiB 
4. Condições de acesso e uso
Idiomaen
Grupo de Usuáriosself-uploading-INPE-MCTI-GOV-BR
simone
Visibilidadeshown
Permissão de Leituradeny from all and allow from 150.163
Permissão de Atualizaçãonão transferida
5. Fontes relacionadas
VinculaçãoTrabalho não Vinculado à Tese/Dissertação
Unidades Imediatamente Superiores8JMKD3MGPCW/43SRC6S
DivulgaçãoWEBSCI; PORTALCAPES; SCOPUS.
Acervo Hospedeirourlib.net/www/2017/11.22.19.04
6. Notas
Campos Vaziosalternatejournal archivingpolicy archivist callnumber copyholder copyright creatorhistory descriptionlevel e-mailaddress format isbn keywords label lineage mark mirrorrepository month nextedition notes orcid pages parameterlist parentrepositories previousedition previouslowerunit progress project readergroup resumeid rightsholder schedulinginformation secondarydate secondarykey secondarymark session shorttitle sponsor subject targetfile tertiarytype url
7. Controle da descrição
e-Mail (login)simone
atualizar 


Fechar